Candy MODELS FOR UNDER-COUNTER FITTING Bedienungsanleitung PDF herunterladen (Seite 11)

Connect Dishwasher to Electricity

ELECTRICAL GROUND IS REQUIRED

ON THIS APPLIANCE

WARNING: Improper connection of the equip-

ment grounding conductor can result

in a risk of electrical shock.

Electrical Connection

It is the personal responsibility and obligation of the

customer to contact a qualified installer to assure

that the electrical installation is adequate and is in

conformance with the National Electrical Code and

local codes and ordinances.

Connect the appliance directly to the fused discon-

nect (or circuit breaker) box or a junction box

through flexible armored or non-metallic sheathed

cable (with ground wire). A suitable strain relief

must be provided at each end of the power supply

cable (at appliance and at the junction box).

This appliance is equipped with copper lead wires.

If connection is made to aluminum house wiring,

use oniy special connectors which are approved for

joining copper and aluminum wires in accordance

with the National Electrical Code and local codes

and ordinances.

Recommended Electrical Connection

and Grounding Method

This appliance must be permanently grounded in

accordance with the National Electrical Code and

local codes and ordinances.

WARNING: Before making electrical connections,

disconnect power at fuse box or circuit breaker.

1. Remove the cover plate from appliance junction

box located behind the toe plate access panel.

2. Connect the white and black wires of the power

supply cable to the white and black leads in the

junction box with twist-on wire connectors.

See Figure 9.

3. Connect the ground wire of the power supply

cable to the ground connection screw located

inside the junction box. See Figure 9.

4. Replace junction box cover plate.

APPLIANCE WIRING

TO 15 AMPERE 120 AMPERE MAXIMUMI

FUSED DISCONNECT BOX OR APPROVED

WIRING DEVICE

GROUND WIRE

POWER SUPPLY

APPLIANCE

AX.

JUNCTION BOX

SCREW

Alternate Grounding Method

If the recommended grounding method is impossible,

permanently ground the appliance from the ground

connection screw inside the appliance junction box to a

grounded cold water pipe* using a separate, green

colored, insulated copper wire conductor of appropriate

size(No. 16 minimum). Part No. 364089 available from

your local Whirlpool Dealer. Do not ground to a gas

supply pipe. Do not connect to electrical supply until

appliance is permanently grounded.

*Grounded cold water pipe must have metal continuity

to electrical ground and not be interrupted by plastic,

rubber or other electrical insulating connectors such as

hoses, fittings, washers or gaskets (including water meter

or pump). Any electrical insulating connector should be

jumped as shown in Figure 2 with a length of No. 4 wire

securely clamped to bar metal at both ends.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Candy MODELS FOR UNDER-COUNTER FITTING Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Candy MODELS FOR UNDER-COUNTER FITTING