Candy MODELS FOR UNDER-COUNTER FITTING Bedienungsanleitung PDF herunterladen (Seite 15)

Access Panel Color

Change

(For Models

Equipped)

WARNING: Use care in changing panels, as you would

with any cut metal edge, to avoid personal injury or

damage to color panels.

TRIM SCREWS (3)

UPPER ACCESS

PANEL SCREW

To loosen access panel (Fig. 16)

1. Remove the upper access panel screws

2. Pull the top of the access panel outward.

3. Remove three screws from the top trim of the access

panel assembly.

4. Remove the top trim.

To change color panel (Fig. 17)

5. Remove the corrugated spacer.

6. Remove the color panels and select the color you

wish to have showing.

7. Replace the color panels with the selected color

facing out.

8. Insert the corrugated spacer behind the color panels.

To replace access panel (Fig. 18)

9. Replace the access panel top trim. Replace and

tighten the three screws.

10. Insert and tighten the upper access panel screws.

Cutting Instructions

for

Wood Front Panels

,/,” Plywood Panel

1. Before cutting panels, be sure grain direction matches

other wood (cabinets) in the area and in the door and

access panelg match.

2. Rout all four sides of both panels 1 inch by l/e inch

deep to provide clearance for installation.

CAUTION: Dishwasher front is subject to some humidity.

For this reason we recommend that both sides and all

edges of the wood panels be covered with a moisture

resistant sealer finish.

WARNING: When installing wood panels, one of the

painted metal panels received with the dishwasher must

be used as an electrical containment barrier.

3. Remove the corrugated board and extra painted

panels and save for future use.

4. For ease of installation, remove both side trims before

putting in wood panels.

5. Follow other instructions for changing front panel

pack.

1 2 ... 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Candy MODELS FOR UNDER-COUNTER FITTING Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Candy MODELS FOR UNDER-COUNTER FITTING